A plumbing problem can be a huge inconvenience and expense. Plumbing leaks may cause major issues such as water damage, mold, and flooding. Keep the following points in mind to prevent household plumbing leaks.
1. Check the Condition of Your Pipes
One of the best ways to prevent household plumbing leaks is also one of the simplest: check the condition of your pipes on a regular basis. For instance, if you have metal pipes visible in your basement, check them for rust. Open cabinets underneath sinks and look at the pipes inside to make sure there are no signs of water leaks.
2. Replace Any Pipes That Have Aged
Different pipes have different lifespans. Depending upon your system, your metal pipes could last for 3-7 decades, while any plastic pipes such as those running to your washing machines may last a decade or so. Rubber hoses for washing machines need to be replaced even more often, so check them often for cracks.
When pipes and hoses are old, they are more likely to leak. If you aren’t sure about checking them yourself, get a plumbing inspection. While this service will cost you, it’s likely going to be less expensive than fixing the damage caused by a plumbing leak.
3. Adjust the Water Pressure
Maintaining a safe water pressure is an important tip to prevent household plumbing leaks. If your pipes have to sustain more than their fair share of water pressure, they are prone to wear out faster than pipes with less pressure. Most homes have the water pressure set to 50 psi and it should never exceed 60 psi. Turn it down to 40-45 to give your pipes a break, and save water.
4. Insulate the Pipes to Prevent Household Plumbing Leaks
In winter, the water inside pipes may freeze burst from the pressure. This is why winter is the time to take extra care to prevent household plumbing leaks. Wrapping exposed pipes and pipes in the crawlspace or basement with foam insulation is an effective preventative measure. When the temperature drops, open up cabinets under sinks to let warm air reach them.